Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-PowerTSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
58.003124mg |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Applications |
Voltage Feedback |
Additional Feature |
IT CAN ALSO OPERATE WITH 2.7V TO 18V SINGLE SUPPLY |
Subcategory |
Audio/Video Amplifiers |
Max Power Dissipation |
2.67W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Base Part Number |
SN10503 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Supply Voltage-Max (Vsup) |
8V |
Power Supplies |
+-5V |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
1 |
Number of Circuits |
3 |
Operating Supply Current |
14mA |
Nominal Supply Current |
45mA |
Output Current |
100mA |
Quiescent Current |
22mA |
Slew Rate |
900V/μs |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Output Current per Channel |
100mA |
Input Offset Voltage (Vos) |
25mV |
Bandwidth |
100000 kHz |
Gain Bandwidth Product |
120MHz |
Voltage Gain |
100dB |
Power Supply Rejection Ratio (PSRR) |
62dB |
-3db Bandwidth |
170MHz |
Input Bias Current |
3μA |
Consumer IC Type |
VIDEO AMPLIFIER |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN10503PWP Overview
A Tube package contains class d amplifier.Due to space constraints, class d amp's available in 14-PowerTSSOP (0.173, 4.40mm Width).Because of audio amplifiers high performance, audio amplifier is an excellent choice for Voltage Feedback.A Surface Mount mounting method is used to connect audio power amplifier to the PCB.A number of 3 circuits are utilized to enhance the audio ic's flexibility of the system.It has a base part number of SN10503, which allows for easy identification of audio amp.A pin count of 14 is present on this amplifier.14 terminations make up digital amplifiers structure.Its -3db bandwidth is 170MHz.Audio/Video Amplifiers includes this audio power amplifier.A 14mA supply current is used for operation.Amplifier ic uses 14 pins for construction.Operating temperatures must be lower than 85°C.Ideally, the operating temperature should be -40°C.Channels available at the moment total 1.This amplifier is equipped with a consumer IC type of VIDEO AMPLIFIER.The mounting method used is Surface Mount.The maximum supply voltage (Vsup) is set to 8V.This scenario results in a current output of 100mA.The audio amplifier ic gains a voltage of 100dB.The audio amplifier ic consumes a quiescent current of 22mA and is not affected by external factors.Audio amplifier also has the property of IT CAN ALSO OPERATE WITH 2.7V TO 18V SINGLE SUPPLY.
SN10503PWP Features
Audio/Video Amplifiers subcategory
14 pins
1 channels
Addtional features of IT CAN ALSO OPERATE WITH 2.7V TO 18V SINGLE SUPPLY
SN10503PWP Applications
There are a lot of Texas Instruments SN10503PWP Video Amps and Modules applications.
- Microphone Preamplifiers
- Audio Test And Measurement
- Telematics control unit
- General-Purpose Amplifier Applications
- Body Control Modules
- Car Audio
- Automotive
- External Audio Amplifiers
- Emergency call (eCall)
- Aftermarket telematics