SN10503PWPR
| Parameters | |
|---|---|
| Operating Supply Current | 14mA |
| Nominal Supply Current | 45mA |
| Output Current | 100mA |
| Quiescent Current | 22mA |
| Slew Rate | 900V/μs |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 25mV |
| Bandwidth | 100000 kHz |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| -3db Bandwidth | 170MHz |
| Input Bias Current | 3μA |
| Consumer IC Type | VIDEO AMPLIFIER |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Voltage Feedback |
| Additional Feature | IT CAN ALSO OPERATE WITH 2.7V TO 18V SINGLE SUPPLY |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.67W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 3 |
| Terminal Pitch | 0.65mm |
| Base Part Number | SN10503 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Supply Voltage-Max (Vsup) | 8V |
| Power Supplies | +-5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Number of Circuits | 3 |
SN10503PWPR Overview
There is a Tape & Reel (TR) package attached to class d amplifier.As a space saver, class d amp is accessible from the 14-PowerTSSOP (0.173, 4.40mm Width) package.This is a good choice for Voltage Feedback because of audio amplifiers high performance.audio power amplifier is mounted on the PCB based on the method of Surface Mount.Using 3 circuits enhances audio ic's flexibility.Audio amp can be located by using SN10503 as the base part number.There are 14 pins on audio digital amplifier.Digital amplifier is made up of 14 terminations.Its -3db bandwidth is 170MHz.I have included this audio power amplifier in Audio/Video Amplifiers.A supply current of 14mA is required to operate audio amplifier.Amplifier ic is constructed using 14 pins.A temperature of less than 85°C should be used for operation.It is recommended that the operating temperature is at least -40°C.Channels available at the moment total 1.IC type VIDEO AMPLIFIER is used for the consumer amplifier.As a mounting method, Surface Mount is used.It is set to 8V as the maximum supply voltage (Vsup).There is 100mA output current in this scenario.It is observed that the audio amplifier ic gains a voltage of 100dB.In addition, it consumes 22mA quiescent current and is not affected by external factors.There is also the property of IT CAN ALSO OPERATE WITH 2.7V TO 18V SINGLE SUPPLY.
SN10503PWPR Features
Audio/Video Amplifiers subcategory
14 pins
1 channels
Addtional features of IT CAN ALSO OPERATE WITH 2.7V TO 18V SINGLE SUPPLY
SN10503PWPR Applications
There are a lot of Texas Instruments SN10503PWPR Video Amps and Modules applications.
- Emergency call (eCall)
- Preamplification and Filtering
- Broadcast Studio Equipment
- Microphone Preamplifier Circuit
- Audio Test and Measurement
- Set-Top Box
- Body Control Modules
- Telematics control unit
- General-Purpose Amplifier Applications
- Analog and Digital Mixing Consoles
