SN54AS645J
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | WITH DIRECTION CONTROL |
| Packing Method | TUBE |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 13 ns |
| Family | AS |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Max I(ol) | 0.064 A |
| Control Type | COMMON CONTROL |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.055mA |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.2mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN54AS645J Overview
Logical driver uses a neat CDIP package. Logical driver can deal with TTL output (s). All of the 1 elements are put into use. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. In the AS family, the electric component belongs. 20 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. Enhanced with 2 ports. The digital buffer starts up under COMMON CONTROL control technology. It is recommended to use a 5V power supply. It is generally sold in TUBE package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH DIRECTION CONTROL to better serve the need. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 125°C. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V.
SN54AS645J Features
WITH DIRECTION CONTROL
SN54AS645J Applications
There are a lot of Texas Instruments SN54AS645J Buffers & Transceivers applications.
- Satellite communication
- WDM transmission
- Wired telephone
- Telecom and datacom networking applications
- Wireless network systems
- Military satellite communications
- Cell phones
- Digital systems
- Point-to-point networking
- VoIP phones
