SN64BCT245N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 64BCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | DIRECTION CONTROL; IOL = 24MA @ VOL = 0.5V & IOH = 3MA @ VOH = 2.4V FOR PORT A |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Output Type | 3-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Family | BCT/FBT |
| Current - Output High, Low | 3mA 24mA; 15mA 64mA |
| Logic Type | Transceiver, Non-Inverting |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Propagation Delay (tpd) | 7.6 ns |
| Length | 24.325mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
SN64BCT245N Overview
Logical driver uses a neat 20-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 3mA 24mA; 15mA 64mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 64BCT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This logical driver is a member of the BCT/FBT family. 20 pins are set with the electric part. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. To supply the device, a minimum voltage of 4.5V is a must. Logical driver features DIRECTION CONTROL; IOL = 24MA @ VOL = 0.5V & IOH = 3MA @ VOH = 2.4V FOR PORT A to better serve the need.
SN64BCT245N Features
DIRECTION CONTROL; IOL = 24MA @ VOL = 0.5V & IOH = 3MA @ VOH = 2.4V FOR PORT A
SN64BCT245N Applications
There are a lot of Rochester Electronics, LLC SN64BCT245N Buffers & Transceivers applications.
- Single fiber bidirectional application
- TV signal transmission
- IPTV front end
- Gigabit Ethernet
- Shortwave receiver
- Fiber-to-the-desktop
- Switches/bridges/routers/servers
- Wireless modems
- Carrier phase observations
- Wireless interactive experience
