SN64BCT245N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 64BCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | DIRECTION CONTROL; IOL = 24MA @ VOL = 0.5V & IOH = 3MA @ VOH = 2.4V FOR PORT A |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 64BCT245 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.6 ns |
| Turn On Delay Time | 11.8 ns |
| Family | BCT/FBT |
| Logic Function | Inverting, Transceiver |
| Current - Output High, Low | 3mA 24mA; 15mA 64mA |
| Logic Type | Transceiver, Non-Inverting |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 7.6 ns |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 90mA |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Length | 24.325mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
SN64BCT245N Overview
Logical driver uses a neat 20-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 3mA 24mA; 15mA 64mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 64BCT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. BCT/FBT family part. 20 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "64BCT245" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features DIRECTION CONTROL; IOL = 24MA @ VOL = 0.5V & IOH = 3MA @ VOH = 2.4V FOR PORT A to better serve the need. The fundamental operation of logical driver is based on 8 circuits.
SN64BCT245N Features
Bus Driver/Transceivers
DIRECTION CONTROL; IOL = 24MA @ VOL = 0.5V & IOH = 3MA @ VOH = 2.4V FOR PORT A
SN64BCT245N Applications
There are a lot of Texas Instruments SN64BCT245N Buffers & Transceivers applications.
- Telecom and datacom networking applications
- Long-distance fiber optic network applications
- Sensor reporting
- Gigabit Ethernet
- Remote controls
- Satellite radio receiver
- transmission relay
- Wireless modems
- Data center
- Single to Multimode Fiber Conversion
