SN65ALS176D

8 Terminations5V 8 Pin 65ALS176 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN65ALS176D
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 811
Description: 8 Terminations5V 8 Pin 65ALS176 Receivers1 Bits 1/1 Drivers/Receivers1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	72.603129mg
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	3-STATE DRIVER OUTPUT AND RECEIVER INPUT
Subcategory	Line Driver or Receivers
Technology	BIPOLAR
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	65ALS176
Pin Count	8
Output Voltage	6V
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-422, RS-485
Nominal Supply Current	30mA
Max Supply Current	30mA
Data Rate	35Mbd
Output Characteristics	3-STATE
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Half
Receiver Hysteresis	60mV
Number of Transceivers	1
ESD Protection	Yes
Receive Delay-Max	25 ns
Simplex/Duplex	Half Duplex
Supply Voltage1-Nom	5V
High Level Input Current-Max	0.00002A
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN65ALS176D Overview

An excellent driver IC for common LEDs thanks to its enhanced 8-SOIC (0.154, 3.90mm Width) package.Tube package is used to mount this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.On any Surface Mount-type PCB or development board, you can install this wide receiver.Power supply requirements for this differential driver are 4.75V~5.25V.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.This wide receiver has 8 terminations for driving and receiving data signals.This transceiver is packaged with 8 market standard pinouts65ALS176 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.The driver IC has improved power dissipation control.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.An important feature of this ic receiver was its 1-bit resolution capability.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a voltage input supply of 5V required for the operation of this integrated circuit.Line Driver or Receivers is a subcategory of this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.There are 1 transceivers implemented in this module isolated transceiver.Additionally, this optical transceiver module features the 3-STATE DRIVER OUTPUT AND RECEIVER INPUT function, which improves the stability and accuracy of signal management in general.In the event that the input current reaches or exceeds 30mA, the can transceiver may malfunction.The device is capable of delivering voltage at 6V.