Parameters |
Base Part Number |
65C3223 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of I/O |
8 |
Nominal Supply Current |
1mA |
Propagation Delay |
150 ns |
Logic Function |
Receiver, Transceiver |
Data Rate |
1Mbps |
Differential Output |
NO |
Output Polarity |
INVERTED |
Protocol |
RS232 |
Input Characteristics |
SCHMITT TRIGGER |
Number of Drivers/Receivers |
2/2 |
Receiver Number of Bits |
2 |
Duplex |
Full |
Receiver Hysteresis |
500mV |
Number of Drivers |
2 |
Number of Transceivers |
1 |
Simplex/Duplex |
Full Duplex |
Supply Voltage1-Nom |
3.3V |
Height |
1.2mm |
Length |
6.5mm |
Width |
4.4mm |
Thickness |
1mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
76.997305mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Type |
Transceiver |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
ALSO OPERATES AT 5V SUPPLY |
Subcategory |
Line Driver or Receivers |
Technology |
BIPOLAR |
Voltage - Supply |
3V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
SN65C3223EPWR Overview
Driver ICs with enhanced 20-TSSOP (0.173, 4.40mm Width) packages are excellent for driving LEDs with common characteristics.The Tape & Reel (TR) package contains this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver requires a 3V~5.5V power supply.As many as 2/2 receivers/drivers are eligible for use on this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.Driver ICs with a supply voltage range of 3.3V can operate efficiently.Integrated into this wide receiver are 20 terminations that are used for driving and receiving signals from data.The transceiver is packaged with 20 market standard pinouts so that it can be easily used.The base part number 65C3223 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation control driver IC featuring 20 pins.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.The integrator circuit is embedded with 2 drivers.In addition, the optical transceiver module's ALSO OPERATES AT 5V SUPPLY function improves signal management accuracy and stability overall.A 8-serial I/O IC is available which provides a standard interface for serial communication.
SN65C3223EPWR Features
Tape & Reel (TR) package
20 pin count
20 pins
SN65C3223EPWR Applications
There are a lot of Texas Instruments SN65C3223EPWR Drivers/Receivers/Transceivers applications.
- Copper connection network
- IP cameras
- Military satellite communications
- Cordless telephone
- Indoor ad hoc meeting
- Satellite radio receiver
- transmission relay
- Laser diode bonding
- Remote controls
- Wireless network systems