SN65C3232DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Technology | BIPOLAR |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65C3232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 3.3V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65C3232DW Overview
Driver ICs with enhanced 16-SOIC (0.295, 7.50mm Width) packages are excellent for driving LEDs with common characteristics.This receiver is mounted in the Tube package.The Transceiver can transceiver type enables this part to be used in a wide range of applications.The wide receiver can be mounted on any Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 3V~5.5V.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.Driver ICs in this category can operate efficiently with a supply voltage range of 3.3V.The integrated terminations of this wide receiver allow it to drive and receive signals from data.It is packaged with 16 pinouts that are market standard for this particular transceiver.The base part number 65C3232 identifies the product type, temperature, package, etc., so you can search for more variants by using it.This is a 16-pin driver IC with enhanced power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In the case of this receiver, a resolution of 2 bits is typically specified.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.There are 1 transceivers in total implemented by this IC.On the integrator circuit, there are 2 drivers embedded.A ALSO OPERATES AT 5V SUPPLY function is also included in this optical transceiver module, which improves stability and accuracy of signal management.
SN65C3232DW Features
Tube package
16 pin count
16 pins
SN65C3232DW Applications
There are a lot of Texas Instruments SN65C3232DW Drivers/Receivers/Transceivers applications.
- Datacom networking applications
- Changeing the frequency from IF to RF
- Military satellite communications
- Wireless projection application for conferences
- Bridges
- Wireless smart house
- Cable network front end
- Single fiber bidirectional application
- Home theater wiring-free
- Desktop PC
