SN65C3232EDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | ALSO OPERATES WITH 5V SUPPLY |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65C3232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Logic Function | Receiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 300 ns |
| Transmit Delay-Max | 300 ns |
| Supply Voltage1-Nom | 3.3V |
| Number of Receivers | 2 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65C3232EDWR Overview
LED drivers with the enhanced 16-SOIC (0.295, 7.50mm Width) package will be able to drive a variety of common LEDs with ease.The package of this receiver is Tape & Reel (TR).Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.The wide receiver can be mounted on any Surface Mount-type PCB or development board.A power supply of 3V~5.5V is used by this differential driver.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.Driver ICs with a supply voltage range of 3.3V can operate efficiently.Integrated into this wide receiver are 16 terminations that are used for driving and receiving signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.As the base part number 65C3232 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.A 16-pin driver IC with enhanced power dissipation control is featured here.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.It was possible to achieve a 2-bit resolution through this ic receiver.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.This IC implements 1 transceivers overall.A 2 receiver is included.A ALSO OPERATES WITH 5V SUPPLY function is also included in this optical transceiver module, which improves stability and accuracy of signal management.Input currents above 1mA could lead to mal-functions in this can transceiver.
SN65C3232EDWR Features
Tape & Reel (TR) package
16 pin count
16 pins
SN65C3232EDWR Applications
There are a lot of Texas Instruments SN65C3232EDWR Drivers/Receivers/Transceivers applications.
- Interconnection between switches and computers
- Routers
- interconnection between switches
- Telecom applications
- Single fiber bidirectional application
- Satellite ground stations
- Wireless access points
- Low power, low voltage systems
- Satellite radio receiver
- Switching system
