SN65ELT20DGKR
| Parameters | |
|---|---|
| Max Supply Voltage | 5.7V |
| Min Supply Voltage | 4.2V |
| Nominal Supply Current | 16mA |
| Propagation Delay | 1.25 ns |
| Turn On Delay Time | 1.25 ns |
| Logic Function | Translator |
| Logic IC Type | LOW SKEW CLOCK DRIVER |
| High Level Output Current | -50mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 50mA |
| Number of True Outputs | 1 |
| Output Signal | PECL |
| Translator Type | Mixed Signal |
| Input Conditioning | STANDARD |
| Input Signal | TTL |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 65ELT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 65ELT20 |
| Pin Count | 8 |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
SN65ELT20DGKR Overview
In the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), it can be found.This package has the format of Tape & Reel (TR).The output it is configured with uses Differential.This electrical device has a translator type of Mixed Signal.Mounting this electronic component follows the Surface Mount method.There is Unidirectional channel type for this electrical device.The temperature used for operation is -40°C~85°C TA.To end a transmission line, there are 8 types of termination that can be used.A series of related parts can be determined from the base part number 65ELT20.A supply voltage of 5V is used to power the device.There are 8 pins on this device.The device is part of the 65ELT series.The pin configuration of the device is 8.Supports a voltage of 5.7V as its maximum supply voltage.4.2V is its minimum supply voltage.1 is the number of channels.There is a logic IC LOW SKEW CLOCK DRIVER used in the system.For maximum efficiency, the supply voltage should be set to 5V.
SN65ELT20DGKR Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 pin count
65ELT series
8 pins
SN65ELT20DGKR Applications
There are a lot of Texas Instruments SN65ELT20DGKR voltage translators & level shifters applications.
- One Assembly and Test Site
- Controlled Baseline
- TVs
- ADAS Fusion
- Personal computing
- Personal Electronics
- Enterprise
- Motor Drives
- General purpose I/O level shifting
- GPIO
