SN65HVD08D
| Parameters | |
|---|---|
| ESD Protection | Yes |
| Receive Delay-Max | 70 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 40 ns |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 85°C |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65HVD08 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Interface | RS-485 |
| Operating Supply Current | 16mA |
| Nominal Supply Current | 16mA |
| Max Supply Current | 16mA |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 35mV |
| Number of Transceivers | 1 |
SN65HVD08D Overview
LED drivers benefit from this IC's enhanced 8-SOIC (0.154, 3.90mm Width) package.The receiver is packaged in a Tube package.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.It takes 3V~5.5V from the power supply to run this differential driver.As many as 1/1 receivers/drivers are eligible for use on this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.An output voltage range of 5V is sufficient to run this line driver ic efficiently.This integrated circuit has 8 terminations designed for driving and receiving signals from data.There are 8 pinouts available on this transceiver which are market standard.The base part number 65HVD08 identifies the product type, temperature, package, etc., so you can search for more variants by using it.This is a 8-pin driver IC with enhanced power dissipation control.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.It provided a 1-bit resolution capability with this ic receiver.It is typical for this receiver to have a resolution of 1 bits when it is specified.There is a voltage input supply of 5V required for the operation of this integrated circuit.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.There are 1 transceivers in total that this module isolated transceiver implements.With this integrating circuit you can drive LEDs of a voltage of up to 16mA. It can be used to drive large displays.A can transceiver that has a current input of 16mA or greater may be affected by malfunctions.
SN65HVD08D Features
Tube package
8 pin count
8 pins
SN65HVD08D Applications
There are a lot of Texas Instruments SN65HVD08D Drivers/Receivers/Transceivers applications.
- Satellite communications networks
- Cable network front end
- VoIP phones
- Ethernet circuitry
- Single to Multimode Fiber Conversion
- Aircraft positioning
- Wireless projection application for business talks
- Remote controls
- AV receiver
- Bar, KTV wireless entertainment
