SN65HVD1040AQDRQ1
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Network Interfaces |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65HVD1040 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 70mA |
| Nominal Supply Current | 70mA |
| Max Supply Current | 70mA |
| Data Rate | 1 Mbps |
| Protocol | CANbus |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Half |
| Receiver Hysteresis | 125mV |
| Number of Receivers | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
SN65HVD1040AQDRQ1 Overview
An excellent driver IC for common LEDs thanks to its enhanced 8-SOIC (0.154, 3.90mm Width) package.The package of this receiver is Tape & Reel (TR).The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.With respect to the power supply, this differential driver uses 4.75V~5.25V.As many as 1/1 receivers/drivers are eligible for use on this electronic part.In most applications, this ic receiver is used in environments where -40°C~125°C is the operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.Transceiver comes with 8 standard pinouts that meet the market's requirements.You can search with 65HVD1040 to get more variants of this part, since it identifies the product type, temperature, package, etc.An enhanced power dissipation control driver IC featuring 8 pins.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.A subcategory named Network Interfaces can be used to group this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.There are 1 receivers inside.Using the input voltage of 70mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.In the case of input current exceeding 70mA, this can transceiver may malfunction.One of the Automotive, AEC-Q100 series, representing an enhanced power-saving method, is this integrating circuit.
SN65HVD1040AQDRQ1 Features
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply
Automotive, AEC-Q100 series
SN65HVD1040AQDRQ1 Applications
There are a lot of Texas Instruments SN65HVD1040AQDRQ1 Drivers/Receivers/Transceivers applications.
- Servers
- Interconnection between switches and computers
- Automation systems
- Wireless security systems
- AV receiver
- Datacom networking applications
- Remote controls
- Ethernet circuitry
- Wireless modems
- SONET/SDH Network
