SN65HVD11P
| Parameters | |
|---|---|
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 65HVD11 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 15.5mA |
| Nominal Supply Current | 15.5mA |
| Data Rate | 10Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 35mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 70 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 40 ns |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
SN65HVD11P Overview
LED drivers benefit from this IC's enhanced 8-DIP (0.300, 7.62mm) package.This receiver is mounted in the Tube package.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.On any Through Hole-type PCB or development board, this wide receiver can be placed.This differential driver consumes 3V~3.6V for its power supplyThis electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.With a supply voltage range of 3.3V, this line driver ic operates efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.ICs that are packaged with market standard pinouts are available on the market.You can search with 65HVD11 to get more variants of this part, since it identifies the product type, temperature, package, etc.It is a 8-pin driver IC with enhanced power dissipation controls.As a result of optical transceiver downsizing and high-density Through Hole mounting technologies, its package size has been greatly reduced.This ic receiver provided a 1-bit resolution capability. Typically, the resolution of this receiver is specified to be 1 bits.There are two types of input voltage supply available for this IC, 3.3V.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.There are 1 transceivers in total that this module isolated transceiver implements.Using a 15.5mA input voltage, this integrating circuit is capable of driving LEDs with an output voltage of 20 V.
SN65HVD11P Features
Tube package
8 pin count
8 pins
SN65HVD11P Applications
There are a lot of Texas Instruments SN65HVD11P Drivers/Receivers/Transceivers applications.
- Wireless security systems
- Wireless teaching
- Single to Multimode Fiber Conversion
- Remote controls
- interconnection between switches
- Ethernet circuitry
- Bridges
- Wireless projection application for conferences
- Notebook
- Low power, low voltage systems
