SN65HVD11QD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65HVD11 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Interface | RS-485 |
| Operating Supply Current | 15.5mA |
| Nominal Supply Current | 15.5mA |
| Data Rate | 10Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 35mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 70 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 40 ns |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD11QD Overview
LED drivers benefit from this IC's enhanced 8-SOIC (0.154, 3.90mm Width) package.Tube package is used to mount this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver requires a 3V~3.6V power supply.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.Applications with operating temperatures of -40°C~125°C have been designed primarily for this ic receiver.3.3V is the supply voltage range that this line driver ic can efficiently operate with.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.The transceiver is packaged with 8 market standard pinouts so that it can be easily used.You can search with 65HVD11 to get more variants of this part, since it identifies the product type, temperature, package, etc.8-pin driver IC with improved power dissipation control.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.It was possible to achieve a 1-bit resolution through this ic receiver.There is usually a 1-bit resolution specified for this receiver when it is used.This transceiver module is designed to operate from an input voltage supply of 3.3V.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.The module isolated transceiver implements a total of 1 transceivers.Using the input voltage of 15.5mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.
SN65HVD11QD Features
Tube package
8 pin count
8 pins
SN65HVD11QD Applications
There are a lot of Texas Instruments SN65HVD11QD Drivers/Receivers/Transceivers applications.
- Optical sub-assembly (OSA)
- interconnection between switches
- Wireless HD Photography
- interconnection between computers
- Cell phones
- VoIP phones
- Aircraft positioning
- Desktop PC
- High-speed computer links
- Wireless transmission
