SN65HVD1780P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 976mW |
| Voltage - Supply | 3.15V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65HVD1780 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Operating Supply Current | 6mA |
| Propagation Delay | 200 ns |
| Data Rate | 115Kbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 2000 ns |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD1780P Overview
Designed for common LEDs, this driver IC features an enhanced 8-DIP (0.300, 7.62mm) package.In the Tube package, this receiver is mounted.As a Transceiver can transceiver, this part has enabled many applications to be served.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.This differential driver uses 3.15V~5.5V for power supply.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver has been designed primarily for applications operating at -40°C~125°C.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.The integrated terminations of this wide receiver allow it to drive and receive signals from data.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.65HVD1780 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control is provided by this 8-pin driver IC.A combination of optical transceiver downsizing and high-density Through Hole mounting reduces the package size dramatically.Using this ic receiver, you were able to achieve a resolution of 1 bits.There is typically a resolution of 1 bits specified with this receiver.This transceiver module is designed to operate from an input voltage supply of 5V.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.ICs implement a total of 1 transceivers.It has the ability to drive LEDs with an input voltage of up to about 6mA with the help of this integrating circuit.
SN65HVD1780P Features
Tube package
8 pin count
8 pins
SN65HVD1780P Applications
There are a lot of Texas Instruments SN65HVD1780P Drivers/Receivers/Transceivers applications.
- IPTV front end
- Fiber distributed data interface (FDDI)
- Copper connection network
- Wireless transmission
- Wireless interactive experience
- Tuner
- Aircraft positioning
- Laser diode bonding
- Fast Ethernet
- Long-distance fiber optic network applications
