SN65HVD1782D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 905mW |
| Voltage - Supply | 3.15V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65HVD1782 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Interface | RS-485 |
| Operating Supply Current | 6mA |
| Propagation Delay | 80 ns |
| Data Rate | 10Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 50 ns |
| Supply Voltage1-Nom | 5V |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 105°C |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD1782D Overview
This LED driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package for driving common LEDs.Tube package is used to mount this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver requires a 3.15V~5.5V power supply.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?IC receiver is designed for applications with a temperature of -40°C~125°C.This line driver ic can operate efficiently with a supply voltage range of 5V.This wide receiver has 8 terminations for driving and receiving data signals.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.For more variants of this part, try searching with the base part number 65HVD1782, which indicates the product type, temperature, package, etc.An enhanced power dissipation driver IC with 8 pins.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.It was possible to achieve a 1-bit resolution through this ic receiver.There is typically a resolution of 1 bits specified with this receiver.An input voltage supply of 5V is required to operate the transceiver module.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.In total, there are 1 transceivers implemented by this module isolated transceiver.Input voltage is set to a value of 6mA, and this integrating circuit is capable of driving LEDs with that voltage.
SN65HVD1782D Features
Tube package
8 pin count
8 pins
SN65HVD1782D Applications
There are a lot of Texas Instruments SN65HVD1782D Drivers/Receivers/Transceivers applications.
- Routers
- Military satellite communications
- Wireless interactive experience
- Portable radio
- Vehicle
- Structural bonding
- Transmission stations
- interconnection between switches
- Wireless 3D game
- LAN, SAN, WAN (local, storage, work area networks)
