SN65HVD1791D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 905mW |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65HVD1791 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 6mA |
| Propagation Delay | 200 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 115Kbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Interface Standard | EIA-485; TIA-485 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 2000 ns |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD1791D Overview
An excellent driver IC for common LEDs thanks to its enhanced 14-SOIC (0.154, 3.90mm Width) package.There is a Tube package for this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.You can place this wide receiver to any Surface Mount-type PCB or development board.This differential driver requires a 4.5V~5.5V power supply.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver's like this are designed for applications requiring a -40°C~105°C operating temperature.With a voltage range of 5V, this driver IC can operate efficiently.For driving and receiving signals from data, this wide receiver has 14 terminations integrated.This transceiver is packaged with 14 market standard pinoutsYou can search with 65HVD1791 to get more variants of this part, since it identifies the product type, temperature, package, etc.Wide receiver with enhanced power dissipation control, 14-pin.It was possible to achieve a 1-bit resolution through this ic receiver.There is usually a 1-bit resolution specified for this receiver when it is used.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.ICs implement a total of 1 transceivers.
SN65HVD1791D Features
Tube package
14 pin count
14 pins
5V power supply
SN65HVD1791D Applications
There are a lot of Texas Instruments SN65HVD1791D Drivers/Receivers/Transceivers applications.
- Precision engineering measurement
- Portable radio
- IP cameras
- Wireless HD Photography
- Fast Ethernet
- Aircraft positioning
- SONET/SDH Network
- Clock radio
- Gigabit Ethernet
- Thermal management
