SN65HVD20D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65HVD20 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 9mA |
| Data Rate | 25Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 130mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 35 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 20 ns |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD20D Overview
Designed for common LEDs, this driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package.The Tube package houses this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.This wide receiver can be placed on any Surface Mount-type PCB or development board.A differential driver like this uses 4.5V~5.5V of power.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.Wide receiver can operate within the range of 5V supply voltages efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.There are 8 pinouts available on this transceiver which are market standard.The base part number 65HVD20 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation control driver IC featuring 8 pins.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.There is typically a resolution of 1 bits specified with this receiver.This transceiver module is designed to operate from an input voltage supply of 5V.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.It implements 1 transceivers in total.It has the ability to drive LEDs with an input voltage of up to about 9mA with the help of this integrating circuit.
SN65HVD20D Features
Tube package
8 pin count
8 pins
5V power supply
SN65HVD20D Applications
There are a lot of Texas Instruments SN65HVD20D Drivers/Receivers/Transceivers applications.
- interconnection between computers
- Cable network front end
- Tuner
- Televisions
- Datacom networking applications
- Wireless network systems
- Cordless telephone
- Broadcast application
- interconnection between switches
- Fiber distributed data interface (FDDI)
