SN65HVD21D
| Parameters | |
|---|---|
| Data Rate | 5Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 130mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 50 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 60 ns |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65HVD21 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 12mA |
| Nominal Supply Current | 12mA |
SN65HVD21D Overview
An excellent driver IC for common LEDs thanks to its enhanced 8-SOIC (0.154, 3.90mm Width) package.The Tube package contains this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.Any Surface Mount-type PCB or development board can be used with this wide receiver.It takes 4.5V~5.5V from the power supply to run this differential driver.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.The integrated terminations of this wide receiver allow it to drive and receive signals from data.There are 8 pinouts available on this transceiver which are market standard.65HVD21 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.8-pin driver chip with enhanced power dissipation.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a 5V input voltage supply that can be used to operate this transceiver module.There is a subcategory named Line Driver or Receivers for this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.There are 1 transceivers in total that this module isolated transceiver implements.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 12mA.
SN65HVD21D Features
Tube package
8 pin count
8 pins
5V power supply
SN65HVD21D Applications
There are a lot of Texas Instruments SN65HVD21D Drivers/Receivers/Transceivers applications.
- Structural bonding
- Car alarm systems
- Wireless multimedia center in smart home
- Sensor reporting
- Fiber optic cable connection network
- Low power, low voltage systems
- IPTV front end
- Routers
- Televisions
- Bridges
