SN65HVD21P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 65HVD21 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 12mA |
| Data Rate | 5Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 130mV |
| ESD Protection | Yes |
| Receive Delay-Max | 50 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 60 ns |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 1 |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD21P Overview
LED drivers benefit from this IC's enhanced 8-DIP (0.300, 7.62mm) package.The Tube package houses this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.PCB or development board with Through Hole-type connectors can accommodate this wide receiver.A differential driver like this uses 4.5V~5.5V of power.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.With a voltage range of 5V, this driver IC can operate efficiently.Wide receiver has 8 terminations built in for driving or receiving signals from data.The transceiver is packaged with 8 market standard pinouts so that it can be easily used.This part number 65HVD21 can be used to search for more variants based on the product type, temperature, package, etc.A 8-pin driver IC with enhanced power dissipation control is featured here.Through optical transceiver downsizing and high-density Through Hole mounting technologies, its package size is reduced dramatically.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.This transceiver module is designed to operate from an input voltage supply of 5V.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.There are also 1 receivers in it as well.
SN65HVD21P Features
Tube package
8 pin count
8 pins
5V power supply
SN65HVD21P Applications
There are a lot of Texas Instruments SN65HVD21P Drivers/Receivers/Transceivers applications.
- Copper connection network
- Aircraft navigation
- Wireless communication
- AV receiver
- Gigabit Ethernet
- Fiber-to-the-desktop
- Mainframes, workstations or storage devices
- Single to Multimode Fiber Conversion
- Fiber optic cable connection network
- Wireless modems
