SN65HVD22DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65HVD22 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 9mA |
| Max Supply Current | 9mA |
| Data Rate | 500kbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 130mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 50 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 500 ns |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD22DR Overview
The enhanced 8-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.The Tape & Reel (TR) package houses this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver uses 4.5V~5.5V for power supply.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.Driver ICs with a supply voltage range of 5V can operate efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.This transceiver is packaged with 8 market standard pinoutsSince the base part number 65HVD22 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation control is provided by this 8-pin driver IC.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.There is typically a resolution of 1 bits specified with this receiver.There is a voltage supply of 5V required in order for this transceiver module to be operated.Line Driver or Receivers is a subcategory of this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.It implements 1 transceivers in total.Input voltage is set to a value of 9mA, and this integrating circuit is capable of driving LEDs with that voltage.In the case of input current exceeding 9mA, this can transceiver may malfunction.
SN65HVD22DR Features
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply
SN65HVD22DR Applications
There are a lot of Texas Instruments SN65HVD22DR Drivers/Receivers/Transceivers applications.
- Ship
- VoIP phones
- 1x/2x Fiber Channel
- Satellite radio receiver
- Point-to-point networking
- Car radio
- SONET/SDH Network
- Transmission stations
- Wireless HD Photography
- Optical sub-assembly (OSA)
