SN65HVD22P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 65HVD22 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 9mA |
| Data Rate | 500kbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 130mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 50 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 500 ns |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD22P Overview
LED drivers benefit from this IC's enhanced 8-DIP (0.300, 7.62mm) package.Tube package is used for this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.PCB or development board with Through Hole-type connectors can accommodate this wide receiver.This differential driver uses 4.5V~5.5V for power supply.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.Wide receiver can operate within the range of 5V supply voltages efficiently.This wide receiver has 8 terminations for driving and receiving data signals.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.For more variants of this part, try searching with the base part number 65HVD22, which indicates the product type, temperature, package, etc.An enhanced power dissipation driver IC with 8 pins.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Through Hole mounting technologies.It provided a 1-bit resolution capability with this ic receiver.There are typically 1 bits of resolution specified in the specifications of this receiver.This transceiver module is designed to operate from an input voltage supply of 5V.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.There is one driver IC in this package which is intended to be operated by 5V of power.The module isolated transceiver implements a total of 1 transceivers.Using the input voltage of 9mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.
SN65HVD22P Features
Tube package
8 pin count
8 pins
5V power supply
SN65HVD22P Applications
There are a lot of Texas Instruments SN65HVD22P Drivers/Receivers/Transceivers applications.
- interconnection between switches
- Military satellite communications
- Notebook
- Ethernet circuitry
- Single to Multimode Fiber Conversion
- Wireless network systems
- Low power, low voltage systems
- Long-distance fiber optic network applications
- Carrier phase observations
- Satellite communication
