SN65HVD23D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65HVD23 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 11mA |
| Data Rate | 25Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 130mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 35 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 20 ns |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD23D Overview
Driver ICs with enhanced 8-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.The package of this receiver is Tube.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver requires a 4.5V~5.5V power supply.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?IC receiver is designed for applications with a temperature of -40°C~85°C.Driver ICs with a supply voltage range of 5V can operate efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.ICs that are packaged with market standard pinouts are available on the market.With the part number 65HVD23 identifying the product type, temperature, package, etc., you can search with it to see more variants.An enhanced power dissipation driver IC with 8 pins.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.This ic receiver provided a 1-bit resolution capability. As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.This transceiver module is designed to operate from an input voltage supply of 5V.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.IC5V is a high performance driver IC designed to work with a 5V power supply.In total, there are 1 transceivers implemented by this module isolated transceiver.It has the ability to drive LEDs with an input voltage of up to about 11mA with the help of this integrating circuit.
SN65HVD23D Features
Tube package
8 pin count
8 pins
5V power supply
SN65HVD23D Applications
There are a lot of Texas Instruments SN65HVD23D Drivers/Receivers/Transceivers applications.
- Wireless showroom
- Desktop radio
- Satellite communication
- Fiber distributed data interface (FDDI)
- Telecom applications
- SONET/SDH Network
- Cordless telephone
- Datacom networking applications
- Interconnection between switches and computers
- Thermal management
