SN65HVD3082EP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 65HVD3082 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 900μA |
| Max Supply Current | 900μA |
| Data Rate | 200kbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 30mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 200 ns |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD3082EP Overview
Designed for common LEDs, this driver IC features an enhanced 8-DIP (0.300, 7.62mm) package.Tube package is used for this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.You can place this wide receiver to any Through Hole-type PCB or development board.With respect to the power supply, this differential driver uses 4.5V~5.5V.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.There are 8 pinouts available on this transceiver which are market standard.Since the base part number 65HVD3082 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.The driver IC has improved power dissipation control.It provided a 1-bit resolution capability with this ic receiver.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.IC5V is a high performance driver IC designed to work with a 5V power supply.There are 1 transceivers in total implemented by this IC.This integrating circuit is able to drive LEDs with an input voltage of 900μA.In the case of input current exceeding 900μA, this can transceiver may malfunction.
SN65HVD3082EP Features
Tube package
8 pin count
8 pins
5V power supply
SN65HVD3082EP Applications
There are a lot of Texas Instruments SN65HVD3082EP Drivers/Receivers/Transceivers applications.
- WDM transmission
- Interconnection between switches and computers
- Wireless modems
- Copper connection network
- Wireless projection application for conferences
- Desktop PC
- Wireless security systems
- Clock radio
- Wireless showroom
- Remote controls
