banner_page

SN65HVD3085ED

8 Terminations5V 8 Pin 65HVD3085 Receivers1 Bits 1/1 Drivers/Receivers1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN65HVD3085ED
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 576
  • Description: 8 Terminations5V 8 Pin 65HVD3085 Receivers1 Bits 1/1 Drivers/Receivers1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Transceiver
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Line Driver or Receivers
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 65HVD3085
Pin Count 8
Operating Supply Voltage 5V
Power Supplies 5V
Interface RS-485
Operating Supply Current 900μA
Nominal Supply Current 900μA
Data Rate 1Mbps
Output Characteristics DIFFERENTIAL
Differential Output YES
Output Polarity COMPLEMENTARY
Protocol RS422, RS485
Input Characteristics DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers 1/1
Driver Number of Bits 1
Receiver Number of Bits 1
Duplex Half
Receiver Hysteresis 30mV
Number of Transceivers 1
Receive Delay-Max 200 ns
Simplex/Duplex Half Duplex
Transmit Delay-Max 500 ns
Supply Voltage1-Nom 5V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN65HVD3085ED Overview


This LED driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package for driving common LEDs.Tube package is used to mount this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.The wide receiver can be mounted on any Surface Mount-type PCB or development board.A power supply of 4.5V~5.5V is used by this differential driver.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.With a voltage range of 5V, this driver IC can operate efficiently.In order to drive and receive signals from data, this wide receiver has 8 terminations integrated.ICs that are packaged with market standard pinouts are available on the market.Since the part number 65HVD3085 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation control driver IC featuring 8 pins.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.Using this ic receiver, you were able to achieve a resolution of 1 bits.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.There is a voltage input supply of 5V required for the operation of this integrated circuit.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.It is designed so that it can be operated from a 5V power supply with this driver IC.There are 1 transceivers in total implemented by this IC.This integrating circuit is able to drive LEDs with an input voltage of 900μA.

SN65HVD3085ED Features


Tube package
8 pin count
8 pins
5V power supply

SN65HVD3085ED Applications


There are a lot of Texas Instruments SN65HVD3085ED Drivers/Receivers/Transceivers applications.

  • transmission relay
  • VoIP phones
  • Structural bonding
  • Indoor ad hoc meeting
  • Wireless teaching
  • Bar, KTV wireless entertainment
  • Thermal management
  • Home theater wiring-free
  • Bridges
  • Shortwave receiver

Write a review

Note: HTML is not translated!
    Bad           Good