SN65HVD3085EDGK
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 65HVD3085 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 900μA |
| Data Rate | 1Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 30mV |
| Receive Delay-Max | 200 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 500 ns |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 1 |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
SN65HVD3085EDGK Overview
The enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package makes it an excellent LED driver.The package of this receiver is Tube.As a Transceiver can transceiver, this part has enabled many applications to be served.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver consumes 4.5V~5.5V for its power supplyAs many as 1/1 receivers/drivers are eligible for use on this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.With a supply voltage range of 5V, this line driver ic operates efficiently.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.It is packaged with 8 pinouts that are market standard for this particular transceiver.Since the part number 65HVD3085 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.It is a 8-pin driver IC with enhanced power dissipation controls.There is a capability of 1-bit resolution with this ic receiver.There are two types of input voltage supply available for this IC, 5V.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.IC5V is a high performance driver IC designed to work with a 5V power supply.The box contains 1 receivers.With this integrating circuit you can drive LEDs of a voltage of up to 900μA. It can be used to drive large displays.
SN65HVD3085EDGK Features
Tube package
8 pin count
8 pins
5V power supply
SN65HVD3085EDGK Applications
There are a lot of Texas Instruments SN65HVD3085EDGK Drivers/Receivers/Transceivers applications.
- Aircraft positioning
- Wireless communication
- Copper connection network
- Data center
- 1x/2x Fiber Channel
- Cell phones
- Wireless HD Photography
- Thermal management
- Wireless smart house
- Cordless telephone
