SN65HVD32DR
| Parameters | |
|---|---|
| Logic Function | Receiver, Transceiver |
| Data Rate | 1Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 70 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 305 ns |
| Supply Voltage1-Nom | 3.3V |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65HVD32 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Interface | RS-422, RS-485 |
| Operating Supply Current | 6.4mA |
| Nominal Supply Current | 3.8mA |
SN65HVD32DR Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-SOIC (0.154, 3.90mm Width) package.The Tape & Reel (TR) package contains this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Any Surface Mount-type PCB or development board can be used with this wide receiver.A power supply of 3V~3.6V is used by this differential driver.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.An operating voltage range of 3.3V is suitable for this line driver ic.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.The pinouts for this transceiver are standardized to meet the needs of the market.Since the part number 65HVD32 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.8-pin driver chip with enhanced power dissipation.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.It is important to note that this ic receiver had a maximum resolution of 1 bits.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.An input voltage supply of 3.3V is required to operate the transceiver module.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.ICs implement a total of 1 transceivers.Input voltage is set to a value of 6.4mA, and this integrating circuit is capable of driving LEDs with that voltage.
SN65HVD32DR Features
Tape & Reel (TR) package
8 pin count
8 pins
SN65HVD32DR Applications
There are a lot of Texas Instruments SN65HVD32DR Drivers/Receivers/Transceivers applications.
- WDM transmission
- Remote controls
- Aircraft positioning
- Clock radio
- Datacom networking applications
- Wireless showroom
- Single fiber bidirectional application
- Cell phones
- Interconnection between switches and computers
- Wired telephone
