SN65HVD33DG4
| Parameters | |
|---|---|
| Max Supply Current | 2.1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 23Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 45 ns |
| Simplex/Duplex | Full Duplex |
| Output Low Current-Max | 0.06A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 133.412856mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | SIGNALING RATE 25MBPS |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65HVD33 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 2mA |
SN65HVD33DG4 Overview
LED drivers benefit from this IC's enhanced 14-SOIC (0.154, 3.90mm Width) package.The Tube package houses this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.This differential driver consumes 3V~3.6V for its power supplyThe field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.3.3V is the supply voltage range that this line driver ic can efficiently operate with.The integrated terminations of this wide receiver allow it to drive and receive signals from data.A package consisting of 14 market standard pinouts is provided with this integrated circuit.Since the base part number 65HVD33 describes the product type, temperature, package, etc., you might get more options by searching with it.14-pin driver IC with improved power dissipation control.It is important to note that this ic receiver had a maximum resolution of 1 bits.There is typically a resolution of 1 bits specified with this receiver.An input voltage supply of 3.3V is required to operate the transceiver module.There is a subcategory named Line Driver or Receivers for this rf transceiver module.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.The SIGNALING RATE 25MBPS function of this optical transceiver module improves the overall stability and accuracy of signal management.If the input current exceeds 2.1mA, this can transceiver could malfunction.
SN65HVD33DG4 Features
Tube package
14 pin count
14 pins
SN65HVD33DG4 Applications
There are a lot of Texas Instruments SN65HVD33DG4 Drivers/Receivers/Transceivers applications.
- Cordless telephone
- Optical sub-assembly (OSA)
- Structural bonding
- Single to Multimode Fiber Conversion
- Desktop PC
- Shortwave receiver
- Remote controls
- Wireless interactive experience
- Switches
- Changeing the frequency from IF to RF
