SN65HVD33DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 133.412856mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | SIGNALING RATE 25MBPS |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65HVD33 |
| Pin Count | 14 |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 2.1mA |
| Max Supply Current | 2.1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 23Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 45 ns |
| Simplex/Duplex | Full Duplex |
| Output Low Current-Max | 0.06A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD33DR Overview
Due to the enhanced 14-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.Tape & Reel (TR) package is used to mount this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.Any Surface Mount-type PCB or development board can be used with this wide receiver.A differential driver like this uses 3V~3.6V of power.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.With a voltage range of 3.3V, this driver IC can operate efficiently.14 terminations are integrated into this wide receiver for driving and receiving signals from data.A package consisting of 14 market standard pinouts is provided with this integrated circuit.Since the base part number 65HVD33 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.14-pin driver chip with enhanced power dissipation.This ic receiver provided a 1-bit resolution capability. There is usually a 1-bit resolution specified for this receiver when it is used.There is a voltage supply of 3.3V required in order for this transceiver module to be operated.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.The module isolated transceiver implements a total of 1 transceivers.Additionally, this optical transceiver module features the SIGNALING RATE 25MBPS function, which improves the stability and accuracy of signal management in general.When the input current reaches or exceeds 2.1mA, this can transceiver could have mal-functions.
SN65HVD33DR Features
Tape & Reel (TR) package
14 pin count
14 pins
SN65HVD33DR Applications
There are a lot of Texas Instruments SN65HVD33DR Drivers/Receivers/Transceivers applications.
- Pocket PC
- Portable radio
- Wireless showroom
- Radio transmission
- Ethernet circuitry
- Low power, low voltage systems
- Wireless transmission
- Home theater wiring-free
- SONET/SDH Network
- Fiber-to-the-desktop
