SN65HVD34D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 133.412856mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65HVD34 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 6.5mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 5Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 70 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 65 ns |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.06A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD34D Overview
An excellent driver IC for common LEDs thanks to its enhanced 14-SOIC (0.154, 3.90mm Width) package.The receiver is packaged in a Tube package.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.A Surface Mount-type PCB or development board can be used to place this wide receiver.It takes 3V~3.6V from the power supply to run this differential driver.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.With a voltage range of 3.3V, this driver IC can operate efficiently.In order to drive and receive signals from data, this wide receiver has 14 terminations integrated.It is packaged with 14 pinouts that are market standard for this particular transceiver.This part number 65HVD34 can be used to search for more variants based on the product type, temperature, package, etc.The driver IC has improved power dissipation control.This ic receiver provided a 1-bit resolution capability. There is usually a 1-bit resolution specified for this receiver when it is used.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 3.3V.3 volts.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.
SN65HVD34D Features
Tube package
14 pin count
14 pins
SN65HVD34D Applications
There are a lot of Texas Instruments SN65HVD34D Drivers/Receivers/Transceivers applications.
- Switching system
- Shortwave receiver
- Fast Ethernet
- transmission relay
- IPTV front end
- Point-to-point networking
- Remote controls
- Wireless 3D game
- Wireless network systems
- LAN, SAN, WAN (local, storage, work area networks)
