SN65HVD34DG4
| Parameters | |
|---|---|
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65HVD34 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 6.5mA |
| Logic Function | Receiver |
| Data Rate | 5Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Receive Delay-Max | 70 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 65 ns |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.06A |
| Number of Receivers | 1 |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 130.010913mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
SN65HVD34DG4 Overview
Driver ICs with enhanced 14-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.This receiver is mounted in the Tube package.The Transceiver can transceiver type enables this part to be used in a wide range of applications.Any Surface Mount-type PCB or development board can be used with this wide receiver.With respect to the power supply, this differential driver uses 3V~3.6V.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.As a standard package, this transceiver comes with a 14-pin layout that follows the market standard.As the base part number 65HVD34 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.A 14-pin driver IC with enhanced power dissipation control is featured here.It is important to note that this ic receiver had a maximum resolution of 1 bits.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 3.3V.In addition to that, it contains 1 receivers as well.
SN65HVD34DG4 Features
Tube package
14 pin count
14 pins
SN65HVD34DG4 Applications
There are a lot of Texas Instruments SN65HVD34DG4 Drivers/Receivers/Transceivers applications.
- Sensor reporting
- Tuner
- Car radio
- Routers
- Cell phones
- Remote controls
- IPTV front end
- Wireless interactive experience
- Wireless security systems
- Desktop radio
