SN65HVD34DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 130.010913mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65HVD34 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 6.5mA |
| Logic Function | Receiver |
| Data Rate | 5Mbps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 70 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 65 ns |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.06A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD34DR Overview
LED drivers with the enhanced 14-SOIC (0.154, 3.90mm Width) package will be able to drive a variety of common LEDs with ease.In the Tape & Reel (TR) package, this receiver is mounted.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.On any Surface Mount-type PCB or development board, you can install this wide receiver.A differential driver like this uses 3V~3.6V of power.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.With a voltage range of 3.3V, this driver IC can operate efficiently.In this wide receiver, 14 terminations are integrated for driving and receiving signals from data.A package consisting of 14 market standard pinouts is provided with this integrated circuit.This part number 65HVD34 can be used to search for more variants based on the product type, temperature, package, etc.It is a 14-pin driver IC with enhanced power dissipation controls.An important feature of this ic receiver was its 1-bit resolution capability.In the case of this receiver, a resolution of 1 bits is typically specified.There is a 3.3V input voltage supply that can be used to operate this transceiver module.The module isolated transceiver implements a total of 1 transceivers.An input voltage of 6.5mA is recommended for this integrating circuit to be able to drive LEDs.
SN65HVD34DR Features
Tape & Reel (TR) package
14 pin count
14 pins
SN65HVD34DR Applications
There are a lot of Texas Instruments SN65HVD34DR Drivers/Receivers/Transceivers applications.
- Copper connection network
- Wireless transmission
- Desktop PC
- Wireless interactive experience
- Car radio
- Routers
- Tuner
- Bridges
- Notebook
- Low power, low voltage systems
