SN65HVD35DR
| Parameters | |
|---|---|
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65HVD35 |
| Pin Count | 14 |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 6.5mA |
| Max Supply Current | 6.5mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 5Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 70 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 305 ns |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.06A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 133.412856mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
SN65HVD35DR Overview
This driver chip is excellent for driving common LEDs due to its enhanced 14-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) package is used to mount this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Surface Mount-type PCB or development board, you can install this wide receiver.Power supply for this differential driver is 3V~3.6V.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.Driver ICs with a supply voltage range of 3.3V can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.ICs that are packaged with market standard pinouts are available on the market.65HVD35 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation driver IC with 14 pins.There is a capability of 1-bit resolution with this ic receiver.This receiver is typically specified with a resolution of 1 bits. There is a supply voltage of 3.3V on the input of this transceiver module, so it can be operated from that source.Line Driver or Receivers is a subcategory of this rf transceiver module.Transceivers implemented by this IC total 1 in total.Input currents exceeding 6.5mA may cause this can transceiver to malfunction.
SN65HVD35DR Features
Tape & Reel (TR) package
14 pin count
14 pins
SN65HVD35DR Applications
There are a lot of Texas Instruments SN65HVD35DR Drivers/Receivers/Transceivers applications.
- Satellite ground stations
- VoIP phones
- Ethernet circuitry
- Wireless projection application for conferences
- Tuner
- Single fiber bidirectional application
- Car radio
- Fiber distributed data interface (FDDI)
- Transmission stations
- Cell phones
