SN65HVD485EDGKR
| Parameters | |
|---|---|
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 30mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 200 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 30 ns |
| Supply Voltage1-Nom | 5V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 19.986414mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 65HVD485 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Data Rate | 10Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
SN65HVD485EDGKR Overview
An excellent driver IC for common LEDs thanks to its enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The package of this receiver is Cut Tape (CT).The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.On any Surface Mount-type PCB or development board, this wide receiver can be placed.A power supply of 4.5V~5.5V is used by this differential driver.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.With a supply voltage range of 5V, this line driver ic operates efficiently.This wide receiver has 8 terminations for driving and receiving data signals.The transceiver is packaged with 8 market standard pinouts so that it can be easily used.For more variants of this part, try searching with the base part number 65HVD485, which indicates the product type, temperature, package, etc.An enhanced power dissipation driver IC with 8 pins.It is important to note that this ic receiver had a maximum resolution of 1 bits.In most cases, the receiver will be specified with a 1-bit resolution.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.There is a subcategory called Line Driver or Receivers for this rf transceiver module.This driver IC is designed to operate from a 5V power supply.Transceivers implemented by this IC total 1 in total.It has the ability to drive LEDs with an input voltage of up to about 2mA with the help of this integrating circuit.Input currents exceeding 2mA may cause this can transceiver to malfunction.
SN65HVD485EDGKR Features
Cut Tape (CT) package
8 pin count
8 pins
5V power supply
SN65HVD485EDGKR Applications
There are a lot of Texas Instruments SN65HVD485EDGKR Drivers/Receivers/Transceivers applications.
- Wireless modems
- Wireless interactive experience
- Desktop PC
- High-speed computer links
- Aircraft navigation
- Tuner
- Wireless communication
- Wireless 3D game
- Radio transmission
- Datacom networking applications
