SN65HVD485EP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.012948mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 65HVD485 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
| Data Rate | 10Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 30mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 200 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 30 ns |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD485EP Overview
LED drivers benefit from this IC's enhanced 8-DIP (0.300, 7.62mm) package.In this package, the receiver is mounted in the Tube format.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.You can place this wide receiver to any Through Hole-type PCB or development board.A differential driver like this uses 4.5V~5.5V of power.As many as 1/1 receivers/drivers are eligible for use on this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.An output voltage range of 5V is sufficient to run this line driver ic efficiently.Wide receiver has 8 terminations built in for driving or receiving signals from data.Transceiver comes with 8 standard pinouts that meet the market's requirements.Since the base part number 65HVD485 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.8-pin driver chip with enhanced power dissipation.Through optical transceiver downsizing and high-density Through Hole mounting technologies, its package size is reduced dramatically.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a 5V input voltage supply that can be used to operate this transceiver module.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.It implements 1 transceivers in total.With an input voltage of 2mA, this integrating circuit has the ability to drive LEDs with an output voltage of 2mA.
SN65HVD485EP Features
Tube package
8 pin count
8 pins
5V power supply
SN65HVD485EP Applications
There are a lot of Texas Instruments SN65HVD485EP Drivers/Receivers/Transceivers applications.
- Structural bonding
- Wireless showroom
- Fiber distributed data interface (FDDI)
- Remote controls
- Fiber-to-the-desktop
- IPTV front end
- IP cameras
- Satellite communication
- 1x/2x Fiber Channel
- AV receiver
