SN65HVD53D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 130.010913mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SIGNALING RATE 25 MBPS |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65HVD53 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 256 |
| Nominal Supply Current | 2.7mA |
| Logic Function | Receiver |
| Data Rate | 25Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Interface Standard | EIA-485-A; TIA-485-A |
| Number of Transceivers | 1 |
| Receive Delay-Max | 40 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD53D Overview
LED drivers with the enhanced 14-SOIC (0.154, 3.90mm Width) package will be able to drive a variety of common LEDs with ease.Tube package is used to mount this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.On any Surface Mount-type PCB or development board, you can install this wide receiver.It takes 4.5V~5.5V from the power supply to run this differential driver.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.This wide receiver has 14 terminations for driving and receiving data signals.It is packaged with 14 pinouts that are market standard for this particular transceiver.This part number 65HVD53 can be used to search for more variants based on the product type, temperature, package, etc.14-pin driver chip with enhanced power dissipation.Using this ic receiver, you were able to achieve a resolution of 1 bits.In most cases, the receiver will be specified with a 1-bit resolution.This transceiver module is designed to operate from an input voltage supply of 5V.It is designed so that it can be operated from a 5V power supply with this driver IC.There are 1 transceivers implemented in this module isolated transceiver.This optical transceiver module also features the SIGNALING RATE 25 MBPS function, improving the overall signal management stability and accuracy.As far as I am aware, this transceiver module is composed of 256 circuits in total.
SN65HVD53D Features
Tube package
14 pin count
14 pins
5V power supply
SN65HVD53D Applications
There are a lot of Texas Instruments SN65HVD53D Drivers/Receivers/Transceivers applications.
- Cordless telephone
- Pocket PC
- Desktop radio
- TV signal transmission
- Automation systems
- Servers
- Single to Multimode Fiber Conversion
- Aircraft positioning
- Fiber-to-the-desktop
- Wireless security systems
