Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Weight |
130.010913mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Transceiver |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
SIGNALING RATE 25 MBPS |
Subcategory |
Line Driver or Receivers |
Technology |
BICMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
65HVD53 |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Operating Supply Current |
2.7mA |
Nominal Supply Current |
2.7mA |
Logic Function |
Receiver, Transceiver |
Data Rate |
25Mbps |
Output Characteristics |
3-STATE |
Differential Output |
YES |
Output Polarity |
TRUE |
Protocol |
RS422, RS485 |
Input Characteristics |
DIFFERENTIAL SCHMITT TRIGGER |
Number of Drivers/Receivers |
1/1 |
Driver Number of Bits |
1 |
Receiver Number of Bits |
1 |
Duplex |
Full |
Receiver Hysteresis |
50mV |
Interface Standard |
EIA-485-A; TIA-485-A |
Number of Transceivers |
1 |
Receive Delay-Max |
40 ns |
Simplex/Duplex |
Full Duplex |
Supply Voltage1-Nom |
5V |
Output Low Current-Max |
0.008A |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN65HVD53DR Overview
The enhanced 14-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.There is a Tape & Reel (TR) package for this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.A power supply of 4.5V~5.5V is used by this differential driver.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver is designed for applications with a temperature of -40°C~85°C.With a supply voltage range of 5V, this line driver ic operates efficiently.Integrated into this wide receiver are 14 terminations that are used for driving and receiving signals from data.As a standard package, this transceiver comes with a 14-pin layout that follows the market standard.65HVD53 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control driver IC featuring 14 pins.This ic receiver provided a 1-bit resolution capability. As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.There is a 5V input voltage supply that can be used to operate this transceiver module.There is a subcategory named Line Driver or Receivers for this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.Transceivers implemented by this IC total 1 in total.In addition, the optical transceiver module's SIGNALING RATE 25 MBPS function improves signal management accuracy and stability overall.An input voltage of 2.7mA is recommended for this integrating circuit to be able to drive LEDs.
SN65HVD53DR Features
Tape & Reel (TR) package
14 pin count
14 pins
5V power supply
SN65HVD53DR Applications
There are a lot of Texas Instruments SN65HVD53DR Drivers/Receivers/Transceivers applications.
- interconnection between computers
- Optical sub-assembly (OSA)
- Precision engineering measurement
- Metro access rings
- Fiber optic cable connection network
- Aircraft navigation
- High-speed computer links
- Fast Ethernet
- Ship
- AV receiver