SN65HVD55DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 130.010913mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65HVD55 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| Logic Function | Receiver |
| Data Rate | 1Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Interface Standard | EIA-485-A; TIA-485-A |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 60 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 230 ns |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD55DR Overview
This LED driver IC features an enhanced 14-SOIC (0.154, 3.90mm Width) package for driving common LEDs.This receiver is mounted in the Tape & Reel (TR) package.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver uses 4.5V~5.5V for power supply.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.Driver ICs with a supply voltage range of 5V can operate efficiently.Wide receiver has 14 terminations built in for driving or receiving signals from data.It is packaged with 14 pinouts that are market standard for this particular transceiver.With the part number 65HVD55 identifying the product type, temperature, package, etc., you can search with it to see more variants.It is a 14-pin driver IC with enhanced power dissipation controls.There is a capability of 1-bit resolution with this ic receiver.Typically, the resolution of this receiver is specified to be 1 bits.There is a voltage input supply of 5V required for the operation of this integrated circuit.IC5V is a high performance driver IC designed to work with a 5V power supply.In total, there are 1 transceivers implemented by this module isolated transceiver.It is capable of driving LEDs with a voltage of 8mA as the input voltage to this integrating circuit.Input currents exceeding 8mA may cause this can transceiver to malfunction.
SN65HVD55DR Features
Tape & Reel (TR) package
14 pin count
14 pins
5V power supply
SN65HVD55DR Applications
There are a lot of Texas Instruments SN65HVD55DR Drivers/Receivers/Transceivers applications.
- transmission relay
- Aircraft navigation
- Switches
- Satellite ground stations
- Changeing the frequency from IF to RF
- Wireless showroom
- Thermal management
- Precision engineering measurement
- High-speed computer links
- Cell phones
