SN65LBC170DB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Resistance | 12kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 995mW |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 65LBC170 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 20mA |
| Data Rate | 30Mbps |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 3/3 |
| Receiver Number of Bits | 3 |
| Duplex | Half |
| Receiver Hysteresis | 40mV |
| Number of Drivers | 3 |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Out Swing-Min | 1 V |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LBC170DB Overview
LED drivers benefit from this IC's enhanced 16-SSOP (0.209, 5.30mm Width) package.This receiver is mounted in the Tube package.As a Transceiver can transceiver, this part has enabled many applications to be served.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver requires a 4.75V~5.25V power supply.During operation, this electronic part may have up to 3/3 eligible receivers/drivers.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.With a supply voltage range of 5V, this line driver ic operates efficiently.This wide receiver has 16 terminations for driving and receiving data signals.The transceiver is packaged with 16 market standard pinouts so that it can be easily used.Since the part number 65LBC170 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.The driver IC has improved power dissipation control.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.As a general rule, this receiver has a resolution of 3 bits that is usually specified.This transceiver module is designed to operate from an input voltage supply of 5V.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.This driver IC is designed to operate from a 5V power supply.This IC implements 1 transceivers overall.Embedded 3 drivers are included on the integrator circuit.This integrating circuit is able to drive LEDs with an input voltage of 20mA.
SN65LBC170DB Features
Tube package
16 pin count
16 pins
5V power supply
SN65LBC170DB Applications
There are a lot of Texas Instruments SN65LBC170DB Drivers/Receivers/Transceivers applications.
- Tuner
- AV receiver
- Wireless HD Photography
- IPTV front end
- Wireless projection application for business talks
- Wired telephone
- Portable radio
- Satellite communications networks
- Gigabit Ethernet
- Wireless 3D game
