SN65LBC171DW
| Parameters | |
|---|---|
| Out Swing-Min | 1 V |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Transceiver |
| Resistance | 12kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 1.48W |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Base Part Number | 65LBC171 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 20mA |
| Data Rate | 30Mbps |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 3/3 |
| Receiver Number of Bits | 3 |
| Duplex | Half |
| Receiver Hysteresis | 40mV |
| Number of Drivers | 3 |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
SN65LBC171DW Overview
Driver ICs with enhanced 20-SOIC (0.295, 7.50mm Width) packages are excellent for driving LEDs with common characteristics.This receiver is mounted in the Tube package.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver uses 4.75V~5.25V for power supply.There can be up to 3/3 eligible receivers/drivers on the field at the same time with this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.For more variants of this part, try searching with the base part number 65LBC171, which indicates the product type, temperature, package, etc.20-pin driver chip with enhanced power dissipation.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.As a general rule, this receiver has a resolution of 3 bits that is usually specified.This transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.There are 1 transceivers implemented in this module isolated transceiver.On the part, 3 drivers are embedded in order to facilitate the operation of the device.An input voltage of 20mA is recommended for this integrating circuit to be able to drive LEDs.
SN65LBC171DW Features
Tube package
20 pin count
20 pins
5V power supply
SN65LBC171DW Applications
There are a lot of Texas Instruments SN65LBC171DW Drivers/Receivers/Transceivers applications.
- Clock radio
- Datacom networking applications
- Copper connection network
- Portable radio
- Bridges
- Ship
- Long-distance fiber optic network applications
- Cell phones
- Desktop PC
- Wireless modems
