SN65LBC172N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Driver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 65LBC172 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Nominal Supply Current | 7mA |
| Propagation Delay | 11 ns |
| Data Rate | 30Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Number of Drivers | 4 |
| Transmit Delay-Max | 20 ns |
| Supply Voltage1-Nom | 5V |
| Out Swing-Min | 1.1 V |
| High Level Input Current-Max | 0.0001A |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LBC172N Overview
LED drivers benefit from this IC's enhanced 16-DIP (0.300, 7.62mm) package.There is a Tube package for this receiver.It has proved to be a valuable component for a variety of applications since it is a Driver can transceiver.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.This differential driver requires a 4.75V~5.25V power supply.The field can have up to 4/0 eligible receivers/drivers at once when using this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.This integrated circuit has 16 terminations designed for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.65LBC172 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.The driver IC has improved power dissipation control.Through optical transceiver downsizing and high-density Through Hole mounting technologies, its package size is reduced dramatically.There is a voltage input supply of 5V required for the operation of this integrated circuit.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.The part is embedded with 4 drivers, so it can be used with 4 devices.
SN65LBC172N Features
Tube package
16 pin count
16 pins
5V power supply
SN65LBC172N Applications
There are a lot of Texas Instruments SN65LBC172N Drivers/Receivers/Transceivers applications.
- Aircraft positioning
- Metro access rings
- Precision geodetic measurement
- Remote controls
- Point-to-point networking
- Fiber-to-the-desktop
- Wireless interactive experience
- Wireless modems
- Cordless telephone
- Desktop PC
