SN65LBC175D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | 5A991.B |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 65LBC175 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 20mA |
| Data Rate | 50Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS423, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Hysteresis | 40mV |
| Receive Delay-Max | 30 ns |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 20A |
| Number of Receivers | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LBC175D Overview
This driver chip is excellent for driving common LEDs due to its enhanced 16-SOIC (0.154, 3.90mm Width) package.There is a Tube package for this receiver.This Receiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.It takes 4.75V~5.25V from the power supply to run this differential driver.As many as 0/4 receivers/drivers are eligible for use on this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.With a voltage range of 5V, this driver IC can operate efficiently.In this wide receiver, 16 terminations are integrated for driving and receiving signals from data.In this package, you will find 16 market-standard pinouts for this transceiver.As the base part number 65LBC175 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This is a 16-pin driver IC with enhanced power dissipation control.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.There are 4 receivers inside.
SN65LBC175D Features
Tube package
16 pin count
16 pins
5V power supply
SN65LBC175D Applications
There are a lot of Texas Instruments SN65LBC175D Drivers/Receivers/Transceivers applications.
- Aircraft navigation
- Point-to-point networking
- transmission relay
- Broadcast application
- Bridges
- Servers
- Satellite radio receiver
- Aircraft positioning
- Fast Ethernet
- Shortwave receiver
