SN65LBC175DW
| Parameters | |
|---|---|
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | 5A991.B |
| Type | Receiver |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 65LBC175 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Data Rate | 50Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS423, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Hysteresis | 40mV |
| ESD Protection | Yes |
| Receive Delay-Max | 30 ns |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Number of Receivers | 4 |
| High Level Input Current-Max | 20A |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
SN65LBC175DW Overview
With the enhanced 16-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.The package of this receiver is Tube.It has proved to be a valuable component for a variety of applications since it is a Receiver can transceiver.The wide receiver can be mounted on any Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 4.75V~5.25V.As many as 0/4 receivers/drivers are eligible for use on this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.Driver ICs with a supply voltage range of 5V can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.It is packaged with 16 pinouts that are market standard for this particular transceiver.Since the part number 65LBC175 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.This is a 16-pin driver IC with enhanced power dissipation control.This transceiver module is designed to operate from an input voltage supply of 5V.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.There are also 4 receivers in it as well.A can transceiver that has a current input of 20mA or greater may be affected by malfunctions.
SN65LBC175DW Features
Tube package
16 pin count
16 pins
5V power supply
SN65LBC175DW Applications
There are a lot of Texas Instruments SN65LBC175DW Drivers/Receivers/Transceivers applications.
- transmission relay
- Fiber-to-the-desktop
- IP cameras
- Metro access rings
- Desktop PC
- 1x/2x Fiber Channel
- WDM transmission
- Car alarm systems
- Radio transmission
- interconnection between switches
