SN65LBC176AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65LBC176 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Data Rate | 30Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 20 ns |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| Out Swing-Min | 1 V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LBC176AD Overview
Designed for common LEDs, this driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package.Tube package is used to mount this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.On any Surface Mount-type PCB or development board, you can install this wide receiver.In terms of power supply, this differential driver utilizes 4.75V~5.25V.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.An operating voltage range of 5V is suitable for this line driver ic.The integrated terminations of this wide receiver allow it to drive and receive signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.You can search with 65LBC176 to get more variants of this part, since it identifies the product type, temperature, package, etc.It is a 8-pin driver IC with enhanced power dissipation controls.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.There is a capability of 1-bit resolution with this ic receiver.It is typical for this receiver to have a resolution of 1 bits when it is specified.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.It implements 1 transceivers in total.Input voltage is set to a value of 15mA, and this integrating circuit is capable of driving LEDs with that voltage.
SN65LBC176AD Features
Tube package
8 pin count
8 pins
5V power supply
SN65LBC176AD Applications
There are a lot of Texas Instruments SN65LBC176AD Drivers/Receivers/Transceivers applications.
- Automation systems
- Servers
- Optical sub-assembly (OSA)
- Broadcast application
- Data center
- Fast Ethernet
- Bridges
- Clock radio
- Telecom applications
- Cell phones
