SN65LBC176P
| Parameters | |
|---|---|
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 65LBC176 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Nominal Supply Current | 1.5mA |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 33 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 25 ns |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 9.81mm |
SN65LBC176P Overview
An excellent driver IC for common LEDs thanks to its enhanced 8-DIP (0.300, 7.62mm) package.Tube package is used for this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.You can place this wide receiver to any Through Hole-type PCB or development board.It takes 4.75V~5.25V from the power supply to run this differential driver.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.With a voltage range of 5V, this driver IC can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.ICs that are packaged with market standard pinouts are available on the market.You can search with 65LBC176 to get more variants of this part, since it identifies the product type, temperature, package, etc.Wide receiver with enhanced power dissipation control, 8-pin.As a result of optical transceiver downsizing and high-density Through Hole mounting technologies, its package size has been greatly reduced.An important feature of this ic receiver was its 1-bit resolution capability.Typically, the resolution of this receiver is specified to be 1 bits.This transceiver module is designed to operate from an input voltage supply of 5V.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.This driver IC is designed to operate from a 5V power supply.There are 1 transceivers in total that this module isolated transceiver implements.
SN65LBC176P Features
Tube package
8 pin count
8 pins
5V power supply
SN65LBC176P Applications
There are a lot of Texas Instruments SN65LBC176P Drivers/Receivers/Transceivers applications.
- Wireless showroom
- Notebook
- IP cameras
- Precision engineering measurement
- Wireless projection application for business talks
- Transmission stations
- Fiber-to-the-desktop
- Routers
- WDM transmission
- Bridges
