SN65LBC179AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65LBC179 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Nominal Supply Current | 15mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 30Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 20 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Out Swing-Min | 1 V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LBC179AD Overview
Driver ICs with enhanced 8-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.The Tube package houses this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.On any Surface Mount-type PCB or development board, you can install this wide receiver.In terms of power supply, this differential driver utilizes 4.75V~5.25V.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.Since the base part number 65LBC179 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.Wide receiver with enhanced power dissipation control, 8-pin.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.It is important to note that this ic receiver had a maximum resolution of 1 bits.Typically, the resolution of this receiver is specified to be 1 bits.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.The driver IC in this product is designed so that it can be powered by 5V.Transceivers implemented by this IC total 1 in total.
SN65LBC179AD Features
Tube package
8 pin count
8 pins
5V power supply
SN65LBC179AD Applications
There are a lot of Texas Instruments SN65LBC179AD Drivers/Receivers/Transceivers applications.
- Indoor ad hoc meeting
- Wireless modems
- Point-to-point networking
- Vehicle
- Mainframes, workstations or storage devices
- Thermal management
- Wireless projection application for conferences
- Satellite radio receiver
- Long-distance fiber optic network applications
- Tuner
