SN65LBC179D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65LBC179 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 4.2mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 30Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 30 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LBC179D Overview
The enhanced 8-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.In the Tube package, this receiver is mounted.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.A differential driver like this uses 4.75V~5.25V of power.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.IC receiver has been designed primarily for applications operating at -40°C~85°C.An output voltage range of 5V is sufficient to run this line driver ic efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.This transceiver is packaged with 8 market standard pinoutsYou can search with 65LBC179 to get more variants of this part, since it identifies the product type, temperature, package, etc.It is a 8-pin driver IC with enhanced power dissipation controls.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.An important feature of this ic receiver was its 1-bit resolution capability.Typically, the resolution of this receiver is specified to be 1 bits.There is a voltage supply of 5V required in order for this transceiver module to be operated.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.It is designed so that it can be operated from a 5V power supply with this driver IC.There are 1 transceivers implemented in this module isolated transceiver.Input voltage is set to a value of 5mA, and this integrating circuit is capable of driving LEDs with that voltage.
SN65LBC179D Features
Tube package
8 pin count
8 pins
5V power supply
SN65LBC179D Applications
There are a lot of Texas Instruments SN65LBC179D Drivers/Receivers/Transceivers applications.
- Wireless HD Photography
- Notebook
- Fast Ethernet
- Radio transmission
- Sensor reporting
- transmission relay
- Vehicle
- Wireless transmission
- Mainframes, workstations or storage devices
- Wireless modems
