SN65LBC180AD

14 Terminations5V 14 Pin 65LBC180 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN65LBC180AD
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 827
Description: 14 Terminations5V 14 Pin 65LBC180 Receivers1 Bits 1/1 Drivers/Receivers1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Weight	122.413241mg
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Line Driver or Receivers
Max Power Dissipation	950mW
Technology	BICMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	65LBC180
Pin Count	14
Output Voltage	1.5V
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-485
Operating Supply Current	15mA
Nominal Supply Current	15mA
Output Current	10μA
Max Supply Current	15mA
Propagation Delay	6 ns
Logic Function	Receiver, Transceiver
Data Rate	30Mbps
Output Characteristics	DIFFERENTIAL
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Full
Receiver Hysteresis	50mV
Number of Transceivers	1
ESD Protection	Yes
Receive Delay-Max	20 ns
Simplex/Duplex	Full Duplex
Supply Voltage1-Nom	5V
Out Swing-Min	1 V
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN65LBC180AD Overview

The enhanced 14-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.The Tube package houses this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.On any Surface Mount-type PCB or development board, this wide receiver can be placed.It takes 4.75V~5.25V from the power supply to run this differential driver.As many as 1/1 receivers/drivers are eligible for use on this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.This transceiver is packaged with 14 market standard pinoutsThe base part number 65LBC180 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation driver IC with 14 pins.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.Using this ic receiver, you were able to achieve a resolution of 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a 5V input voltage supply that can be used to operate this transceiver module.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.In total, there are 1 transceivers implemented by this module isolated transceiver.An input voltage of 15mA is recommended for this integrating circuit to be able to drive LEDs.In the case of input current exceeding 15mA, this can transceiver may malfunction.The device is capable of delivering voltage at 1.5V.In this bluetooth transceiver, we are able to get a maximum output current of 10μA.