SN65LBC180D
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65LBC180 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Nominal Supply Current | 4mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 45mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 33 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
SN65LBC180D Overview
This LED driver IC features an enhanced 14-SOIC (0.154, 3.90mm Width) package for driving common LEDs.There is a Tube package for this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver uses 4.75V~5.25V for power supply.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.With a voltage range of 5V, this driver IC can operate efficiently.Integrated into this wide receiver are 14 terminations that are used for driving and receiving signals from data.In this package, you will find 14 market-standard pinouts for this transceiver.The base part number 65LBC180 identifies the product type, temperature, package, etc., so you can search for more variants by using it.This is a 14-pin driver IC with enhanced power dissipation control.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.This ic receiver provided a 1-bit resolution capability. This receiver is typically specified with a resolution of 1 bits. There is a voltage supply of 5V required in order for this transceiver module to be operated.There is a subcategory called Line Driver or Receivers for this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.This IC implements 1 transceivers overall.
SN65LBC180D Features
Tube package
14 pin count
14 pins
5V power supply
SN65LBC180D Applications
There are a lot of Texas Instruments SN65LBC180D Drivers/Receivers/Transceivers applications.
- Desktop radio
- Wireless projection application for conferences
- Aircraft navigation
- Wireless transmission
- Wireless interactive experience
- 1x/2x Fiber Channel
- Servers
- Single to Multimode Fiber Conversion
- High-speed computer links
- Metro access rings
