SN65LBC184P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 65LBC184 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 25mA |
| Nominal Supply Current | 25mA |
| Max Supply Current | 25mA |
| Data Rate | 250kbps |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| ESD Protection | Yes |
| Receive Delay-Max | 300 ns |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.004A |
| Number of Receivers | 1 |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LBC184P Overview
An excellent driver IC for common LEDs thanks to its enhanced 8-DIP (0.300, 7.62mm) package.The receiver is packaged in a Tube package.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Any Through Hole-type PCB or development board can be used with this wide receiver.With respect to the power supply, this differential driver uses 4.75V~5.25V.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.An operating voltage range of 5V is suitable for this line driver ic.8 terminations are integrated into this wide receiver for driving and receiving signals from data.Transceiver comes with 8 standard pinouts that meet the market's requirements.For more variants of this part, try searching with the base part number 65LBC184, which indicates the product type, temperature, package, etc.Wide receiver with enhanced power dissipation control, 8-pin.Its package size is drastically reduced by downsizing ICs and utilizing high-density Through Hole mounting techniques.This ic receiver provided a 1-bit resolution capability. As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.Additionally, there are 1 receivers included in the package.An input voltage of 25mA is recommended for this integrating circuit to be able to drive LEDs.A can transceiver that has a current input of 25mA or greater may be affected by malfunctions.
SN65LBC184P Features
Tube package
8 pin count
8 pins
5V power supply
SN65LBC184P Applications
There are a lot of Texas Instruments SN65LBC184P Drivers/Receivers/Transceivers applications.
- TV signal transmission
- Desktop radio
- Precision geodetic measurement
- Carrier phase observations
- Satellite communications networks
- Televisions
- Wireless transmission
- Satellite ground stations
- interconnection between switches
- Thermal management
